Lincoln 2009 MKS Owner'S Manual Download Page 88 | Manualshive

Page: 88 / 331

background image

2. Press and hold the RESET
control for two seconds and release.
Oil life is set to 100% and “OIL LIFE
SET TO 100%” is displayed.

3. While “OIL LIFE SET TO 100%”
is displayed, if a lower oil life is
desired, press and release the RESET control to reduce the value. Each
press of the RESET control reduces the value by 10 percent.

Note:

Oil life of 100% equals 7,500 miles (12,000 km) or six months. For

example, setting oil life to 60% sets the oil life value to 4,500 miles
(7,200 km) and 108 days.

Units (English/Metric)

1. Select this function from the
SETUP menu for the current units
to be displayed.

2. Press the RESET control to
change from English to Metric.

Auto high beam (if equipped)

This feature automatically turns on your high beams if it is dark enough
and no other traffic is present.

1. To disable/enable the auto high
beam feature, select this function
from the SETUP menu for the
current display mode.

2. Press the RESET control to turn
the auto high beam ON or OFF.

Autolamp

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

1. To disable/enable the autolamp
delay feature, select this function
from the SETUP menu for the
current display mode.

2. Press the RESET control to select
the new autolamp delay values of 0,
10, 20, 30, 60, 90, 120 or 180 seconds.

Driver Controls

88

2009 MKS

(mks)

Owners Guide

(own2002)

, 3rd Printing

USA

(fus)

«
...
86
87
88
89
90
...
»

Summary of Contents for 2009 MKS












































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MKS

Brand: Jeep Pages: 6

Brand: Back View Pages: 168

Brand: CAMPARK Pages: 20

Prestige APS-45B

Brand: Audiovox Pages: 8

Brand: Volvo Pages: 138

Brand: Kuda-Phonebase Pages: 3

Brand: Cargo Floor Pages: 16

Brand: Ironton Pages: 7

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Brand: Maserati Pages: 210

Brand: OnStar Pages: 22

PRIME DESIGN VRR-NV200

Brand: Safe Fleet Pages: 12

Brand: TAUBENREUTHER Pages: 8

PRIME DESIGN URX-001-E

Brand: Safe Fleet Pages: 8

V70XC Cross country 1998

Brand: Volvo Pages: 262

Sedan CIVIC 2022

Brand: Honda Pages: 701

Brand: Westin Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands