Lincoln 2009 MKS Owner'S Manual Download Page 33

Page: 33 / 331

Radio Display

Condition

Action Required

ACQUIRING

Radio requires more
than two seconds to

produce audio for

the selected

channel.

No action required. This

message should disappear

shortly.

SAT FAULT

Internal module or

system failure

present.

If this message does not

clear within a short period

of time, or with an ignition

key cycle, your receiver

may have a fault. See your

authorized dealer for

service.

INVALID CHNL

Channel no longer

available.

This previously available

channel is no longer

available. Tune to another

channel. If the channel was

one of your presets, you

may choose another

channel for that preset

button.

UNSUBSCRIBED

Subscription not
available for this

channel.

Contact SIRIUS at

1–888–539–7474 to

subscribe to the channel or

tune to another channel.

NO TEXT

Artist information

not available.

Artist information not

available at this time on

this channel. The system is

working properly.

NO TEXT

Song title

information not

available.

Song title information not

available at this time on

this channel. The system is

working properly.

Entertainment Systems

2009 MKS

(mks)

Owners Guide

(own2002)

, 3rd Printing

USA

(fus)

Summary of Contents for 2009 MKS












































































































































































































































































































































Search results

Summary of Contents for 2009 MKS

Reviews:

Related manuals for 2009 MKS

Brands by name

Popular brands

Lincoln 2009 MKS, Owner'S Manual

Search results

Summary of Contents for 2009 MKS

Reviews:

Related manuals for 2009 MKS

Brands by name

Popular brands