Lincoln 2006 LS Owner'S Manual Download Page 255

Page: 255 / 320

4. Check all battery terminals and remove any excessive corrosion before
you attach the battery cables. Ensure the vent caps are tight and level.

5. Turn the heater fan on in both vehicles to protect any electrical
surges. Turn all other accessories off.

Connecting the jumper cables

1. Connect the positive (+) jumper cable to the positive (+) terminal of
the discharged battery.

Note:

In the illustrations,

lightning bolts

are used to designate the

assisting (boosting) battery.

2. Connect the other end of the positive (+) cable to the positive (+)
terminal of the assisting battery.

–

2006 Lincoln LS

(dew)

Owners Guide (post-2002-fmt)
USA

(fus)

Roadside Emergencies

255

Summary of Contents for 2006 LS

































































































































































































































































































































Search results

Summary of Contents for 2006 LS

Reviews:

Related manuals for 2006 LS

Brands by name

Popular brands

Lincoln 2006 LS, Owner'S Manual

Search results

Summary of Contents for 2006 LS

Reviews:

Related manuals for 2006 LS

Brands by name

Popular brands