manualshive.com logo in svg

Lincoln 2006 LS, Owner'S Manual

The Lincoln 2006 LS Quick Reference Manual is a comprehensive manual that provides detailed instructions and information on operating your Lincoln 2006 LS. With easy-to-follow instructions, this manual is essential for any Lincoln owner. Download this manual for free from manualshive.com and get all the knowledge you need at your fingertips.

Share
Download
background image

Automatic shift mode

Operates like a normal automatic
transmission for P (Park),
R (Reverse), N (Neutral), D5 and
D4.

Refer to

Driving with a 5–speed

automatic transmission

in this

chapter for P (Park), R (Reverse),
N (Neutral), D5 and D4 information.

Manual shift mode

With the gearshift lever in D5
(Overdrive), the gearshift lever can
be moved to the right and into the
manual shift mode. The transmission
will remain in the manual shift mode
until the gearshift lever is moved
back to D5 (Overdrive).

+ and - position operation

These positions allow the driver to
manually select the appropriate
upshift (+) or downshift (-) and
gear range.

•

Can only be entered from the D5
position.

•

Gear ranges 1–5 provide the same
function and ratio as found in the
D5 or D4 automatic mode
positions.

•

Transmission will not upshift or downshift unless the selector lever is
moved forward or rearward.

•

One tap forward (+) will

command

the transmission to upshift one

gear range.

2006 Lincoln LS

(dew)

Owners Guide (post-2002-fmt)
USA

(fus)

Driving

231

Summary of Contents for 2006 LS

































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 LS

Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Hama 00173884 Operating Instructions Manual preview
00173884
Brand: Hama Pages: 13
V8 equipment E.BEX Manual preview
E.BEX
Brand: V8 equipment Pages: 34
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
SpeedTech Lights STL Boss Quick Start Manual preview
STL Boss
Brand: SpeedTech Lights Pages: 2
WABCO 2S/2M Installation Instructions Manual preview
2S/2M
Brand: WABCO Pages: 40
BMW 530 GRAN TURISMO - 2010 Brochure preview
530 GRAN TURISMO - 2010
Brand: BMW Pages: 26
Quadratec 12057.0102 Installation Manual preview
12057.0102
Brand: Quadratec Pages: 8
Buick 1997 Park Avenue Manual preview
1997 Park Avenue
Brand: Buick Pages: 420
Alpine IVE-W530 (French) Mode D'Emploi preview
IVE-W530
Brand: Alpine Pages: 70
Chevrolet CORVETTE 427 Release Note preview
CORVETTE 427
Brand: Chevrolet Pages: 6

Brands by name

Popular brands

Load more brands