Lincoln 2006 LS Owner'S Manual Download Page 251

Page: 251 / 320

Tire change procedure

To help prevent the vehicle from moving when you change a tire,
be sure the parking brake is set, then block (in both directions)

the wheel that is diagonally opposite (other side and end of the
vehicle) to the tire being changed.

If the vehicle slips off the jack, you or someone else could be
seriously injured.

1. Park on a level surface, activate
hazard flashers and set parking
brake.

2. Place gearshift lever in P (Park) ,
turn engine OFF, and block the
diagonally opposite wheel.

3. Lift the trunk cargo cover and
remove the spare tire, jack and lug
wrench.

2006 Lincoln LS

(dew)

Owners Guide (post-2002-fmt)
USA

(fus)

Roadside Emergencies

251

Summary of Contents for 2006 LS

































































































































































































































































































































Search results

Summary of Contents for 2006 LS

Reviews:

Related manuals for 2006 LS

Brands by name

Popular brands

Lincoln 2006 LS, Owner'S Manual

Search results

Summary of Contents for 2006 LS

Reviews:

Related manuals for 2006 LS

Brands by name

Popular brands