Lincoln 2006 LS Owner'S Manual Download Page 155

Page: 155 / 320

Push control to lower head restraint.

Using the manual lumbar support (if equipped)

The lumbar control is located on the
front of the seat cushion.

Turn to adjust lumbar support.

Using the power lumbar support (if equipped)

The power lumbar control is located
on the outboard side of the seat.

Press the front of the control to
increase firmness.

Press the back of the control to
decrease firmness.

Adjusting the power seats

The power seat controls are located on the outboard side of each seat.

Never adjust the driver’s seat or seatback when the vehicle is
moving.

2006 Lincoln LS

(dew)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

155

Summary of Contents for 2006 LS

































































































































































































































































































































Search results

Summary of Contents for 2006 LS

Reviews:

Related manuals for 2006 LS

Brands by name

Popular brands

Lincoln 2006 LS, Owner'S Manual

Search results

Summary of Contents for 2006 LS

Reviews:

Related manuals for 2006 LS

Brands by name

Popular brands