Front safety belt energy management retractors
The front safety belt energy management retractors allow webbing to be
pulled out of the retractor in a gradual and controlled manner in
response to the occupant’s forward momentum. This helps reduce the
risk of force-related injuries to the occupant’s chest by limiting the load
on the occupant. Refer to
Energy management feature
section in this
chapter.
Determining if the Personal Safety System
姟
is operational
The Personal Safety System
娂
uses a warning light in the instrument
cluster or a back-up tone to indicate the condition of the system. Refer
to the
Warning light
section in the
Instrument cluster
chapter. Routine
maintenance of the Personal Safety System
娂
is not required.
The Restraints control module (RCM) monitors its own internal circuits
and the circuits for the airbag supplemental restraints, crash sensor(s),
safety belt pretensioners, front safety belt buckle sensors, and driver seat
position sensor. In addition, the RCM also monitors the restraints
warning light in the instrument cluster. A difficulty with the system is
indicated by one or more of the following.
•
The warning light will either flash or stay lit.
•
The warning light will not illuminate immediately after ignition is
turned on.
•
A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and warning light are repaired.
If any of these things happen, even intermittently, have the Personal
Safety System
娂
serviced at an authorized dealer immediately. Unless
serviced, the system may not function properly in the event of a
collision.
Safety restraints precautions
Always drive and ride with your seatback upright and the lap
belt snug and low across the hips.
To reduce the risk of injury, make sure children sit in the back
seat where they can be properly restrained.
2006 Lincoln LS
(dew)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
164
Summary of Contents for 2006 LS
Page 320: ...320 ...