Lincoln 2004 Town Car Owner'S Manual Download Page 279

Page: 279 / 305

Additional information contained on the tire sidewall for “LT” type
tires

“LT” type tires have some additional
information beyond those of “P”
type tires; these differences are
described below:

LT:

Indicates a tire, designated by

the Tire and Rim Association
(T&RA), that is intended for service
on light trucks.

Load Range/Load Inflation

Limits:

Indicates the tire’s

load-carrying capabilities and its
inflation limits.

Maximum Load Dual lbs. (kg)

at psi (kPa) cold:

Indicates the

maximum load and tire pressure
when the tire is used as a dual;
defined as four tires on the rear axle (a total of six or more tires on the
vehicle).

Maximum Load Single lbs. (kg) at psi (kPa) cold:

Indicates the

maximum load and tire pressure when the tire is used as a single;
defined as two tires (total) on the rear axle.

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Maintenance and Specifications

278

Summary of Contents for 2004 Town Car


















































































































































































































































































































Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands

Lincoln 2004 Town Car, Owner'S Manual

Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands