manualshive.com logo in svg

Lincoln 2004 Town Car, Owner'S Manual

Looking for the Owner's Manual for your Lincoln 2004 Town Car? Look no further! Download it for free from manualshive.com, your go-to destination for manuals. Get all the information you need about your vehicle, from maintenance tips to troubleshooting, at the click of a button.

Share
Download
background image

•

Cover the highlighted areas to prevent water damage when cleaning
the engine.

•

Never wash or rinse the engine while it is running; water in the
running engine may cause internal damage.

PLASTIC (NON-PAINTED) EXTERIOR PARTS

Use only approved products to clean plastic parts. These products are
available from your dealer.

•

For routine cleaning, use Motorcraft Detail Wash (ZC-3–A).

•

If tar or grease spots are present, use Motorcraft Bug and Tar
Remover (ZC-42).

WINDOWS AND WIPER BLADES

The windshield, rear and side windows and the wiper blades should be
cleaned regularly. If the wipers do not wipe properly, substances on the
vehicle’s glass or the wiper blades may be the cause. These may include
hot wax treatments used by commercial car washes, tree sap, or other
organic contamination. To clean these items, please follow these tips:

•

The windshield, rear windows and side windows may be cleaned with
a non-abrasive cleaner such as Motorcraft Ultra Clear Spray Glass
Cleaner (ZC-23), available from your dealer.

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA_English

(fus)

Cleaning

239

Summary of Contents for 2004 Town Car


















































































































































































































































































































Reviews:

No comments

Related manuals for 2004 Town Car

CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Vauxhall 2009 Tigra Quick Reference Manual preview
2009 Tigra
Brand: Vauxhall Pages: 2
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Raptor Series MAGNUM RT Series Manual preview
MAGNUM RT Series
Brand: Raptor Series Pages: 6
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Ecco 5545A Installation And Operating Instructions Manual preview
5545A
Brand: Ecco Pages: 12
ConWys AG 21500598C VW Fitting Instructions Manual preview
21500598C VW
Brand: ConWys AG Pages: 16
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
PUTCO 1951 Series Instruction Manual preview
1951 Series
Brand: PUTCO Pages: 3
Lock'er Down 2011 X Instructions preview
2011 X
Brand: Lock'er Down Pages: 2
Lund Tonno Pro Installation Instructions Manual preview
Tonno Pro
Brand: Lund Pages: 12
Wallbox PLP1 Installation Manual preview
PLP1
Brand: Wallbox Pages: 21
Volvo XC40 RECHARGE Retailer Pairing Manual preview
XC40 RECHARGE
Brand: Volvo Pages: 5
Audi Q7 V12 TDI QUATTRO - Brochure preview
Q7 V12 TDI QUATTRO -
Brand: Audi Pages: 20

Brands by name

Popular brands

Load more brands