manualshive.com logo in svg

Lincoln 2004 Town Car, Owner'S Manual

Looking for the Owner's Manual for your Lincoln 2004 Town Car? Look no further! Download it for free from manualshive.com, your go-to destination for manuals. Get all the information you need about your vehicle, from maintenance tips to troubleshooting, at the click of a button.

Share
Download
background image

Never spin the tires in excess of the 35 mph (55 km/h) point
indicated on the speedometer.

Highway hazards

No matter how carefully you drive there’s always the possibility that you
may eventually have a flat tire on the highway. Drive slowly to the
closest safe area out of traffic. This may further damage the flat tire, but
your safety is more important.

If you feel a sudden vibration or ride disturbance while driving, or you
suspect your tire or vehicle has been damaged, immediately reduce your
speed. Drive with caution until you can safely pull off the road. Stop and
inspect the tires for damage. If a tire is under-inflated or damaged,
deflate it, remove wheel and replace it with your spare tire and wheel. If
you cannot detect a cause, have the vehicle towed to the nearest repair
facility or tire dealer to have the vehicle inspected.

SNOW TIRES AND CHAINS

Snow tires must be the same size and grade as the tires you
currently have on your vehicle.

The tires on your vehicle have all weather treads to provide traction in
rain and snow. However, in some climates, you may need to use snow
tires and chains.

Follow these guidelines when using snow tires and chains:

•

Use only cable type chains offered by Ford as an accessory or
equivalent. Using SAE class S or other conventional link type chains
may cause damage to the vehicle’s wheel house and/or body.

•

Install chains securely, verifying that the chains do not touch any
wiring, brake lines or fuel lines.

•

Drive cautiously. If you hear the chains rub or bang against your
vehicle, stop and re-tighten the chains. If this does not work, remove
the chains to prevent damage to your vehicle.

•

If possible, avoid fully loading your vehicle.

•

Remove the tire chains when they are no longer needed. Do not use
tire chains on dry roads.

•

The suspension insulation and bumpers will help prevent vehicle
damage. Do not remove these components from your vehicle when
using snow tires and chains.

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA_English

(fus)

Maintenance and Specifications

285

Summary of Contents for 2004 Town Car


















































































































































































































































































































Reviews:

No comments

Related manuals for 2004 Town Car

GMC HUMMER EV 2022 Manual preview
HUMMER EV 2022
Brand: GMC Pages: 140
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Softride 26428 Instructions preview
26428
Brand: Softride Pages: 4
Wagan Easy Air Auto Screen User Manual preview
Easy Air Auto Screen
Brand: Wagan Pages: 8
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6
Mitsubishi Pajero Pinin 1999 Workshop Manual preview
Pajero Pinin 1999
Brand: Mitsubishi Pages: 919
Valeo MBHL Operating Manual preview
MBHL
Brand: Valeo Pages: 29
Curt Manufacturing LIPPERT 18109 Installation Manual preview
LIPPERT 18109
Brand: Curt Manufacturing Pages: 3
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
Malone Stax Pro2 Installation & Loading Instructions preview
Stax Pro2
Brand: Malone Pages: 16
SAN HIMA SH-TENT-GRAY-AHT125 User Manual preview
SH-TENT-GRAY-AHT125
Brand: SAN HIMA Pages: 11
Comtronics 246559 Installation Instructions Manual preview
246559
Brand: Comtronics Pages: 18
VBG 56-239200 Mounting Instruction/Spare Parts List preview
56-239200
Brand: VBG Pages: 20

Brands by name

Popular brands

Load more brands