Lincoln 2004 Town Car Owner'S Manual Download Page 106

Page: 106 / 305

2. Hold down the MODE button for
5 seconds to enter zone mode. The
display will read PRESS RESET TO
SET ZONE XX where XX is the
current zone.

3. Release the MODE button.

4. Determine which magnetic zone
you are in by referring to the zone
map.

5. Repeatedly press and release the
RESET button to scroll through the
zones 1–15 until the desired zone is
displayed.

6. Press the MODE button to save
the new zone setting and return to
the compass normal mode.

Note:

The compass exits the zone

setting mode and returns to its previous setting after one minute of no
activity.

Note:

If power is interrupted during the zone setting process, the

compass resets to the same zone it was set to before the zone change
process was started.

Calibration mode

For optimum calibration, turn off all electrical accessories (heater/air
conditioning, wipers, etc.) and make sure all vehicle doors are shut.

To calibrate the compass:

1. Press and release the MODE
button until the compass directional
heading is displayed.

7 8 9 1011

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Driver Controls

105

Summary of Contents for 2004 Town Car


















































































































































































































































































































Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands

Lincoln 2004 Town Car, Owner'S Manual

Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands