Lincoln 2004 Town Car Owner'S Manual Download Page 14

Page: 14 / 305

Air suspension:

Illuminates when

the air suspension is turned OFF or
the air suspension system requires
servicing.

Washer:

Illuminates when the

windshield washer fluid is low.

Speed control:

Illuminates when

the speed control is activated. Turns
off when the speed control system
is deactivated.

O/D off:

Illuminates when the

overdrive function of the
transmission has been turned OFF
using the transmission control
switch (TCS), refer to the

Driving

chapter. If the light flashes steadily
or does not illuminate, have the
transmission serviced soon, or
damage may occur.

Door ajar:

Illuminates when any

door is open (or not fully closed).

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Instrument Cluster

Summary of Contents for 2004 Town Car


















































































































































































































































































































Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands

Lincoln 2004 Town Car, Owner'S Manual

Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands