Lincoln 2004 Town Car Owner'S Manual Download Page 15

Page: 15 / 305

Trunk ajar:

Illuminates when the

trunk is not completely closed. This
light will flash and sound a tone for
one second, then the light remains
on.

Turn signal:

Illuminates when the

left or right turn signal or the
hazard lights are turned on. If the
indicators stay on or flash faster, check for a burned out bulb.

High beams:

Illuminates when the

high beam headlamps are turned on.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the OFF/LOCK or ACCESSORY position and the driver’s door
is opened.

Turn signal chime (if equipped):

Sounds when the turn signal lever

has been activated to signal a turn and not turned off after the vehicle is
driven more than 0.8 km (1/2 mile).

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Instrument Cluster

Summary of Contents for 2004 Town Car


















































































































































































































































































































Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands

Lincoln 2004 Town Car, Owner'S Manual

Search results

Summary of Contents for 2004 Town Car

Reviews:

Related manuals for 2004 Town Car

Brands by name

Popular brands