Tandem Operator Manual
13
IF THERE IS APPARENT DAMAGE:
UNITED STATES AND CANADA: Arrangements should be made to file a claim against the carrier, as Interstate
Commerce Regulations require that the consignee initiate a claim.
ALL SHIPMENTS TO OTHER COUTRIES: Freight terms will be developed and extended on an individual basis.
Proper and secure storage facilities should be arranged for the ovens. If necessary, protect it from outdoor or
damp conditions at all times before installation.
UNCRATING
When you have all the crates unloaded, open the crates and remove the plastic covers. Inspect at once for
concealed damage. If anything appears to be damaged, contact the appropriate persons immediately to file a
damage claim. After completing this inspection, finish unpacking the ovens and all other components.
Be sure to
remove the cardboard from the plenum shroud.
Move all components inside near the area where they will be
assembled in the order in which they will be assembled.
THE OVEN WILL CLEAR THROUGH A 30” (762 mm) DOORWAY BY USING THE FOLLOWING PROCEDURE:
1. Remove thumb screws and baffle from the left side of the oven.
2. Place the oven side opposite of control box on a four wheel moving dolly and it will clear a 30” (762 mm)
doorway.
EXTERIOR DIMENSIONS
Gas and electrical services should be located as shown below. If flexible services are provided, they must meet
code requirements for such installation.
MANUAL GAS VALVE INSTALLATION
When installing the gas valve that is supplied with the oven, it is our suggestion that an elbow be placed on the
oven pipe first. This will allow the flexible hose to be attached in a downward direction eliminating possible stress
to the hose.
SPECIFICATIONS
Body: Stainless Steel
Power: Gas and/or Electric
DB Level:
≤
75dba
Operating Temperature Range: 250º - 600º F (121º - 316º C)
TANDEM TOP VIEW
Connections to gas source may be made at either end of
Tandem unit upon completion of Gas Utility Kit installation.
Summary of Contents for 10003032
