Lincoln Foodservice 10003032, Operator'S Manual, Page: 15 / 48

Tandem Operator Manual 15
RESTRAINT REQUIREMENT – GAS OVEN(S) ON CASTERS, U.S. AND AUSTRALIA
NOTE: TANDEM OVENS REQUIRE TWO (2) RESTRAINING DEVICES PER BOTTOM DECK – ONE FOR EACH
STAND.
1. The installation shall be made with a gas connector that complies with the Standard for Connectors for Movable
Gas Appliances, ANSI Z21.69 latest version, and a quick disconnect device that complies with the Standard for
Quick Disconnect Devices for Use With Gas Fuel, ANSI Z21.42 latest version.
IN CANADA: The installation shall be made with gas connectors that comply with Canadian Code CAN.16.9-88
and quick disconnects complying to Canadian Code CAN.16.9-M79.
IN AUSTRALIA: To be installed in accordance with AS 5601-2004 and 4563-2004 Gas Installation Code.
2. The installation of the restraints must limit the movement of the ovens without depending on the connector, the
quick disconnect device or its associated piping to limit the oven movement.
3. If the restraints must be disconnected during maintenance or cleaning, they must be reconnected after the oven
has been returned to its originally installed position.
OPERATIONS
1. Screw lifting eye “B” of cable assembly to hole “A”.
2. Screw eye bolt “C” of cable assembly to stud in wall “D” or floor anchor “E”.
NOTE: Installation point is the same for single and double stack oven(s).
RESTRAINING DEVICE
CONNECTION POINTS “A”
A A
REAR VIEW OF 2-DECK TANDEM
WALL
FLOOR
STUD
B
C
E
D
OUT TO OVEN CONNECTION “A”