Lincoln Electric Torchmate 5100 Series, User Manual

Page: 55 / 87

43
User Guide
Quality Test Cut:
1. Press SELECT JOB
2. Locate 5100 FL170+300 INLINE TEST CUT 80a.GM and press OK
3. Verify that your material type is set Steel, the thickness to 3/16”, and
the amperage to 80 on your Process Setup screen
4. 5100 Inline test cut will now show in the display
5. Set the AVHC MODE to AUTO
6. Set the AVHC SAMPLE VOLTAGE to ON
7. Set the AVHC IHS (ohmic detection) to ON
8. Set the AVHC IHS MODE to ALWAYS
9. Jog the head over to the Lower Left corner of the material you are
going to cut and press SET PROGRAM ZERO
10. Set the Machine to Active Run (If Dry Run is displayed, press once to
toggle to Active Run)
11.
12. PRESS RUN JOB. This will move the torch to the plate and start
the job.
(PLASMA TORCH WILL FIRE! WEAR APPROPRIATE EYE PROTECTION.)
13. The sample cut includes a plasma marked ‘5100’ feature then
processes the inside features. The code switches the plasma to
marking and populates the settings.
• Rapid travel to the first inside feature
• Z Axis moves toward the material, touching the top of the
material (IHS -ohmic detection)
• Torch retracts to set PIERCE HEIGHT and will fire and starts the
program.
• Once the marking is complete, the plasma will switch to cut all
inside features first, then move to the outside geometry
Once cut is complete, compare the cut to the provided sample and verify that
they match. This will provide proof that the machine is functioning properly.
NOTE:
Part will be hot after cutting. Wear proper gloves prior to handling the
processed cut.
4.550
6.000 ±.032
5.000 ±.032
If you need to stop the
machine at any time
please hit the stop
button on the touch
screen.