Lincoln Electric K3269-1, Operator'S Manual

Page: 14 / 118

INSTALLATION
NOTE:
Installation of the M21182 harness and spool gun selector switch is
not required for all machines. If a spool gun switch is pre-installed in the
machine’s wire drive compartment, then the SPOOL GUN / WIRE DRIvE
SLECTOR SWITCH INSTALLATION SECTION can be disregarded.
INSTALLATION
SPOOL GUN / WIRE DRIvE
SELECTOR SWITCH
INSTALLATION
1
. Install the M21182 electrical adapter
harness that came with the spool gun
per the following instructions.
ELECTRIC SHOCK CAN KILL.
2. Disconnect input
power from the
machine.
------------------------------------------------
OPEN THE MACHINE
3. Remove two 5/16“ hex hinge screws
from door.
4. Remove ten 5/16“ hex screws from
cover.
5. Remove screws from cover.
( A) is the location of two 3/4” long
screws.
6. Remove cover.
7. If machine has a plastic handle (A) ,
then remove screw (B) .
WARNING
A
A
B
A-5 A-6
RECOMMENDED WELDING MACHINES
MACHINE NAME
K-NUMBER CODE NUMBER
INSTALLATION OF M21182 HARNESS
AND SELECTOR SWITCH
POWER MIG 216
POWER MIG 180C
POWER MIG 140C
POWER MIG 180 DUAL
POWER MIG 180C (AU)
POWER MIG 180C (CE)
PRO CORE 125T WELDER
PRO MIG 140T WELDER
WELD PAK 125HD WELDER
WELD PAK 140HD WELDER
MIG PAK 140 WELDER
EASY CORE 125 WELDER
EASY MIG 140 WELDER
CORE PAK 125 WELDER
PRO MIG 180T WELDER
WELD PACK 180HD WELDER
MIG PAK 180 WELDER
SP-140T
SP-180T
EASY MIG 180 WELDER K2816-2
K2473-2
K2471-2
K3018-2
K2668-1
K2661-1
K2479-1
K2480-1
K2513-1
K2514-1
K2658-1
K2696-1
K2697-1
K2785-1
K2481-1
K2515-1
K2659-1
K2688-2
K2689-2
K2698-1 11817
11820
11804
11828
11444
11442
11631
11634
11632
11635
11636
11633
11637
11639
11646
11647
11648
11805
11822
11650 NOT REQUIRED
REQUIRED
REQUIRED
NOT REQUIRED
REQUIRED
REQUIRED
SPOOL GUN USE NOT AVAILABLE
NOT REQUIRED
SPOOL GUN USE NOT AVAILABLE
NOT REQUIRED
NOT REQUIRED
SPOOL GUN USE NOT AVAILABLE
NOT REQUIRED
SPOOL GUN USE NOT AVAILABLE
REQUIRED
REQUIRED
REQUIRED
REQUIRED
REQUIRED
REQUIRED