Lincoln Electric Growth Series, Assembly Manual

Page: 38 / 94

Torchmate Growth Series
28
Step A3: Install the gantry
Like the sides of the Torchmate 2x4 Growth Series CNC Cutting System table, the full gantry is pre-assembled
with a drive-screw, motor, and steel rail. In this step, you will set the gantry on the side rails.
Qty Part Description Part #
1 GS 2' gantry, assembled TMS-180-1000-01
1 Assembled frame components From Step A2
Required parts /
components
Instructions
Illustration
• Loosen the inner and outer bearings so that they can be moved outward to give clearance
for the rail.
• Set the gantry onto the sides over the rails. Make sure the vertical bearings are taking the
weight of the gantry and that it is free to move.
• Ensure that the gantry’s tool-mounting plate faces away from the motors on the end
of the two sides.