Lincoln Electric Growth Series, Assembly Manual, Page: 68 / 94

Torchmate Growth Series
58
Step C8: Secure cutting table to water table
Finally, in the eighth step, you mount the cutting table onto the water table. Because the cutting table is
heavy, have someone available to help lift it. After mounting it securely, check the table’s squareness by
measurement and by high-speed jogging.
Required parts /
components
Instructions
Illustration
Qty Part Description Part #
1 Cutting table From Step A14
1 Water Table From Step C8
4 Screw, BSCS,
1
⁄
4
"–20 X
3
⁄
4
" TMS-410-0214-12
4 Washer, flat
1
⁄
4
" washer, steel,
zinc-plated
TMS-413-0001-16
• Attach the cutting table to the water table’s legs. The legs have threaded holes. Use
button-head cap-screws and flat washers.
• Check that the table is square and level. Adjust the leveling feet, as needed. Refer to Step
A5 of the cutting table installation for the beginning steps of the squaring procedure.
• With the table square and level, fully tighten all screws.
• Fill the water pan with water and check for leaks.