Lincoln Electric Growth Series, Assembly Manual, Page: 62 / 94

Torchmate Growth Series
52
Step C3: Attach legs to each end panel
In the third step, you attach the legs to both end panels. Because adjustments may be required later, you only
partly tighten the screws now.
Required parts /
components
Instructions
Illustration
Qty Part Description Part #
2 Assembled end panel component From Step C1
4 Assembled corner leg component From Step C2
12
Screw, BSCS,
5
⁄
16
"
–
18 X
5
⁄
8
"
TMS-410-0216-10
12
Nut, Nylock, hex,
5
⁄
16
"
–
18, steel,
zinc-plated
TMS-414-0201-16
• Attach one assembled cut out side from Step 1 to two assembled legs from Step 2 using
six
5
⁄
16
"–18 x
5
⁄
8
" Button Head Cap Screws and six
5
⁄
16
"–18 Hex Nuts
• The side panels are slotted to be adjusted once the cutting table is attached.
• Repeat this assembly for the second cut out side.
• Do not fully tighten the cap screws.