Lincoln Electric Growth Series, Assembly Manual

Page: 37 / 94

Assembly Guide
27
Qty Part Description Part #
2 Aluminum Cross Member - 2' Wide GS TMS-180-0002-08
2 Assembled table side
components
From Step A1
Step A2: Assemble table frame
The Torchmate 2x4 Growth Series CNC Cutting System table uses extruded aluminum cross-members
attached to the sides with T-nuts. Here you will create the initial linking of the sides with the cross-members.
The final adjustment for squareness is completed at a later step.
Required parts /
components
Instructions
Illustration
• Perform this assembly on a flat, level surface.
• Slide the cross-members onto the T-nuts on the pre-assembled sides. There are channels
in the extruded aluminum cross members for the T-nuts to slide into.
• When the T-nuts are tightened, they will hold table securely.
• The T-nuts will be adjusted and fully tightened later, so for now, tighten them only
lightly.
• Attach both cross members to one side, then slide the other side on and lightly tighten.