Lincoln Electric Growth Series, Assembly Manual

Page: 65 / 94

Assembly Guide
55
Step C6: Seal the edge to the water pan bed
Required parts /
components
Instructions
Illustration
The 2x4 Growth Series water pan bed, which holds the water, is built in multiple pieces so that during “growth”
to the larger sized water tables, the existing pans can continue to be used. The sixth step attaches the pans and
edge as well as seals the water pans.
Qty Part Description Part #
1 GS water pan, 2x2 TMS-180-0002-02
1 GS water pan, 2x4 TMS-180-0001-17
1 GS water pan edge, 2x4 TMS-180-0001-18
35
Screw, BSCS,
5
⁄
16
"
–
18 X
5
⁄
8
"
TMS-410-0216-10
35
Nut, Nylock, hex,
5
⁄
16
"
–
18, steel,
zinc-plated
TMS-414-0201-16
1 GS silicone sealant, tube TMS-180-1001-01
• Apply a generous, continuous, double-bead of silicone sealant to the mating surfaces of
the water pan beds and edge. Avoid gaps in the sealant, which may cause leakage.
• Attach the water pans together and then add the edge with screws and nuts. Don't tighten
so much as to squeeze out all the sealant.
• Trim off the excess sealant after it has thoroughly set.
With the pans joined,
apply sealant
along these seams.
Apply sealant and
tighten screws and
nuts on this edge first
Note: Welded-in slat supports
are not shown here
Align the holes on the
edge with those on the
pans. Insert and tighten
the screws and nuts to
complete the seal.