C-2
ACCESSORIES
CRUISER
TM
Accessories Included with the
CRUISER™
:
Conduit Tubing, 5 feet (1.5 m)
5/32” 600 Amp contact nozzle assembly
5/32” contact tip
Nozzle extension, 5 inches long (127 mm)
Nozzle extension insulator
Nozzle extension, 45° Curved
Flux tubing
Flux Hose Clamps
Wire Reel Assembly
Wheels for track operation
Manually guide steering wheel (LT-7 like)
Front and Rear outriggers
Wire Reel Enclosure
Does not include a control cable.
K3090-1
Tube and clamp kit
Includes: one 30”
aluminum splined tube;
one 15” aluminum splined
tube; one 30” steel tube; 8
clamp assemblies with
keys; 2 outrigger
assemblies; hardware.
K3089-1
Cross Slide Assembly
Includes: two slides with 4
inches of travel. (1 cross
slide assembly included
with each tractor.)
K1733-5
Wire Straightener
Includes: A three roll wire
straightener with
adjustable pressure. (1
included with each tractor)
K396
Track Section
Includes: a single section
of 70 in (1.8m) of track.
K3070-1
Tiny Twin Kit for the
tractor
Includes: 2
nd
spindle, drive
rolls, 57:1 gears.
K1543-xx
ArcLink Control Cable
Includes: 5 pin to 5 pin
tractor to power source
control cable. Cables may
be connected end-to-end to
make a longer cable.
Connectors are black
anodized aluminum.
K2683-xx
ArcLink Control Cable,
Heavy Duty
Includes: 5 pin to 5 pin
tractor to power source
control cable. Cables may
be connected end-to-end to
make a longer cable.
Female connector is a
brass spin nut. Male
connector is made from
stainless.
K1504-1
60 lb Coil Adapter
Includes: one coil adapter
for use with 2” spindles.