1. Engage the clutch at the rear of the tractor.
2. Select either forward or reverse travel on the pen-
dant.
3. Press and hold the jog button, or place the toggle
switch in the MANUAL travel position.
MOVING THE TRACTOR
The tractor will not travel unless the clutch is engaged.
To engage the clutch, rotate the handle upwards. To
disengage the clutch, rotate the handle to the 3 o’clock
position.
The travel speed is adjustable from 7 to 100 in/min
(1.78 to 2.54 m/min). From 7 to 20 in/min, the travel
speed may be set in 0.5 inch/min increments. Above
20 in/min, the travel speed adjusts at 1.0 inch/min
increments.
To drive the tractor without welding:
B-2
OPERATION
CRUISER
TM
FIGURE B.1 - PENDANT CONTROLS
FIGURE B.2 - ENGAGE THE CLUTCH
FIGURE B.4 - JOB BUTTON, TOGGLE SWITCH
FIGURE B.3 - TRAVEL DIRECTION