INSTALLATION
PRISM® SUSPEND 4000
Step 10 - Install Filters (See section D for filter
replacement instructions)
Before opening door, unit must be off and the power
switch on the side of the control panel turned to the off
position.
a. Unlock door latches
FIGURE A.10a
FIGURE A.10b
FIGURE A.10c
FIGURE A.10d
Step 11 - lock door
To prevent accidental door opening during unit operation, lock
door latches using the supplied hex tool (or standard 5/16" hex
wrench.
FIGURE A.11
WARNING
1. Unclasp
handles for
installation.
Unit ships with
door latches
locked. Unlock
latches using the
supplied hex tool
(or standard 5/16"
hex wrench), then
open door.
into unit as
shown,
making sure
they are
pushed
against rear
of unit.
1. Reclasp filter
handles to lift
filters to their
sealed
position.
2. Close and
latch door.
A-12
