LINCHR H Series, User Manual

Page: 32 / 90

30
4
Settings of password:
When you use the APP for the first
time or the charger parameters are
reset, the password of the charger
needs to be configured.
When setting the password, you need
to input the same password twice
before it can be set successfully. The
current password is limited to 6
characters including ASCII
characters a-z, A-Z, 0-9. If the
password settings twice are different,
the user will be prompted to
configure the same password twice.
There is an eye-shaped icon (the red
column in the right second figure)
behind the password input column,
and the password can be displayed
after clicking it.
5
When exiting the APP and logging in
again, you need to input the password
configured then you can enter the
charger operation interface. If the
password is incorrectly, it will
prompt that the password is wrong
(the red column in the right second
figure).
Note: APP can only connect one
charger at a time!