LINCHR H Series, User Manual

Page: 23 / 90

21
4
Pull out the power supply incoming
line from the cable outlet in the
middle of the pedestal, remove the
left and right side plates of the
pedestal base (red column in the right
figure), then vertically pass through
M8 expansion bolts on the
installation platform, and fix the
pedestal with M8 screws and flat pad.
Finally, install the left and right side
plates of the pedestal base.
5
Remove the back bracket on the back
of the charger;
Continue to remove the four M6 × 20
screws of the pedestal suspension
plate;
Align the back bracket with the four
screw holes of the pedestal hanging
plate, and fix the back pegboard on
the pedestal with four M6 × 20
screws.