Linak TECHLINE LA33, User Manual

Page: 26 / 76

Page 26 of 76
Actuator with endstop signals and absolute positioning - PWM
I/O specifications:
Input/Output Specification Comments
Description The actuator can be equipped with
electronic circuit that gives an analogue
feedback signal when the actuator moves.
See connection diagram,
fig. 8, page 26
Brown 12 or 24VDC (+/-)
12V ± 20%
24V ± 10%
Under normal conditions:
12V, max. 13A
depending on load
24V, max. 9A depending on load
To extend actuator:
Connect Brown to positive
Connect Blue to negative
To retract actuator:
Connect Brown to negative
Connect Blue to positive
Blue
Red Signal power supply (+)
12-24VDC ± 10%
Current consumption:
Max. 60mA, also when the actuator is
not running
Black Signal power supply GND (-)
Green Endstop signal out Output voltage min. V
IN
- 2V
Source current max. 100mA
NOT potential free
Yellow Endstop signal in
Violet Digital output feedback (PNP)
10-90% (Option 5)
20-80% (Option 6) Output voltage min. V
IN
- 2V
Tole/- 2%
Max. current output: 12mA
Frequency: 75Hz
It is recommendable to have the
actuator to activate its limit switches
on a regular basis, to ensure more
precise positioning
White Not to be connected
PWM