Instruction Manual for TECH-system type 239
______________________________________________________________________________
Page 17 of 39 june 2020 ver. 09
LINAK Danmark A/S - Mønstedsvej 9 8600 Silkeborg - Telefon 86803611 - www.linak.dk
Installing the actuators
When installing actuators, it is important to make sure that the actuators can move freely along their full
stroke length, without being limited by the mechanical construction. It is also important to ensure that the
application is not subjected to uneven twisting and traction, nor to unevenly distributed load.
NB!
The actuator must only be secured using the piston end and rear fastening plate –
never the outer tube of the spindle or the motor housing.
For additional information, please refer to the data sheet for the actuator in question.
