45
After NFS server started, you need to check the firewall settings of Linux server
(firewall service usually need to be turned off). Make sure that the using NFS port
and communicating host are not masked. Mainly check option settings like
iptables
,
ipchains
of linux server and the files -
/etc/hosts.deny
,
/etc/hosts.allow
.
loop test NFS server on linux server, check if shares directory can be visited or not.
Run the following command on Linux server:
# mount
–
t nfs 192.168.18.106:/home/user/nfs /mnt/nfs
// need to creat a new 'nfs' directory under mnt
# ls /mnt
The command will export and mount 'nfs' directory onto to /mnt directory.
Therefore, if NFS works normally, you can view the files of
/home/user/nfs
shared
directory under
/mnt
.
2)
LimHD200i - NFS client Setup
Choose
Networkpath\NFS
in
setup
menu. It will pop up a soft-keyboard. set
the IP address of your linux server and the path of the shared folder, such as
'192.168.18.106:/home/user/nfs'
You can delete the default IP and Path by selecting Back on the screen. Input the
IP address and path by selecting numbers or letters using
UP DOWN LEFT
RIGHT
buttons. Press enter to confirm and exit.
Choose
Networkpath\Static IP
to set your IP address of your limHD200i, or
Networkpath\DHCP
to get an IP address automatically.
Go back to main menu by pressing
EXIT
button, reboot the system.
Choose NETWORK(NFS) on the main screen then you can visit shared movie files
on your NFS server.
z
Restore to the Default Settings
If there is a malfunction, or if you want to restore the device to original factory default settings,
please enter the
System Setup Menu
and move the cursor to “Factory Set” and press
RIGHT
button on the remote control. When the following picture shows, press
OK
and the default
settings will be restored.
