15
Required Components
• Aurora Pro
• Leader cables (optional)
6
• LED pixels
• Audio input
• 5 A Power Top-Up(s)
• Power-T(s)
• Aurora Pro outdoor enclosure (optional)
Method
1. Power Aurora Pro OFF. Aurora Pro must be contained in an outdoor enclosure
for outdoor installations. Refer to the
Aurora Product Guide
for outdoor
accessories.
2. Connect Power-T(s) to each 5 A Power Top-Up.
3. Connect leader cables to each built-in LED connector.
4. Connect LED pixel strands to each leader cable (or to each built-in LED
connector if leader cables are not in use).
5. Connect the Power-T/5 A Power Top-Up(s) to the end of each LED pixel strand.
6. Connect additional Power-T/5 A Power Top-Ups and LED pixel strands, not
exceeding 80-100 LED pixels per Power Top-Up or 500 LED pixels per port.
7. Power Aurora Pro ON.
8. Connect Aurora Pro to the Aurora Mobile App. Refer to
Connect to Aurora Pro
in AP Mode
for details.
9. Set the number of LED pixels per port, including LED pixels added with Power
Top-Ups, using the Aurora Mobile App. Refer to
Configure the Aurora Mobile
App
for details.
10. Connect an audio input to Aurora Pro and calibrate audio using the Aurora
Mobile App Audio Settings. Refer to
Connect and Calibrate Audio Inputs
for
details.
11. Refer to
Configure the Aurora Mobile App
to begin customizing your light
show.
Configure a Network Distribution Box (NDB)
Network Distribution Boxes (NDBs) increase the number of LED pixels supported by
Aurora Pro. Installations using NDBs must be configured with NDB software.
If you are using multiple NDBs, refer to
Configure Multiple NDBs
. If you are using a
single NDB, skip to
Set Number of LED Pixels Per Port
.
6
Leader cables longer than 15’ require Power Top-Ups and Smart Extender/Receiver adapters. Refer
to the
Aurora Product Guide
for details on Power Top-Ups and Smart Extender/Receiver adapters.
