Lika IFS-10-PM, User Manual

Page: 27 / 44

IFS-10-PM programming & display unit
6 - IFS-10-PM parameters list
NOTE
Please refer to each specific “User's manual” for the complete list of the safety
unit parameters.
The parameters for “Input Scaling” are listed in the following menu of the safety
device:
Safety unit  Edit Data  OPU menu  ...
Parameter Group Parameter Min Max Default
Input Scaling for
display 3 and 4
*
X Factor 1
1 999999 1
/ Divisor 1
1 999999 1
+/- Value 1
-999999 999999 0
Units 1
0 12 0
Decimal Point 1
0 5 0
X Factor 2
1 999999 1
/ Divisor 2
1 999999 1
+/- Value 2
-999999 999999 0
Units 2
0 12 0
Decimal Point 2
0 5 0
* If the version of the safety device is lower than 04A, the scaling parameters
are in the IFS-10-PM unit. If the version of the safety device is higher than
04A, the scaling parameters are available in the “OPU menu” of the safety
device.
MAN IFS-10-PM EN 1.1.odt 6 - IFS-10-PM parameters list 27/44