IFS-10-PM programming & display unit
3.4 Cleaning, maintenance, and service notes
WARNING
Switch the power off before cleaning the front screen.
To clean the front side and the display of the unit please always use a soft,
clean, slightly damp (not wet!) cloth such as a microfibre or cotton cloth to
remove the dust from the display. Gently wipe the surface without exerting any
pressure. Should it be necessary to use a liquid to remove persistent stains or
fingerprints, lightly dampen the cloth with water.
For the rear side no cleaning is necessary. For an unscheduled, individual
cleaning of the rear side the maintenance technicians or installation operators
are self-responsible.
Do not use abrasive fabrics or materials such as paper towels even though they
are soft as they scratch the display.
Do not use chemical agents and products that are generally used for cleaning,
methylated spirit or ammonia as they could damage the screen surface and
make marks.
During normal operation no maintenance is necessary. In case of unexpected
problems, failures or malfunctions the device must be shipped back to the
manufacturer for any checking, adjustment or repair. Unauthorized opening and
repair operations can have negative effects or failures to the protection
measures of the unit.
WARNING
Solvents and abrasive materials could damage the display. Do not rub or brush
the surface. Do not use aggressive and/or flammable products to clean the
screen.
MAN IFS-10-PM EN 1.1.odt
3 – Technical features
13/44
