Lika AM 3616/4096BG Series, User Manual

Page: 25 / 36

AMx36 • SSI & BiSS C-mode
- Address: the register address is expressed in hexadecimal notation.
- Attribute:
ro = read only
rw = read and write
wo = write only
- Default parameter value is written in
bold
.
Profile ID
[42 - 43, ro]
These registers contain the identification code of the used profile.
Register 42 43
AMx36
00 00
See “Standard encoder profile”, “data format”, “Variant 0-24”.
Serial number
[44 … 47, ro]
These registers contain the serial number of the device expressed in hexadecimal
notation.
Register 44: year of production.
Register 45: week of production.
Registers 46 and 47: serial number in ascending order.
Command
[48, wo]
Value Function
00 Normal operational state
01 Save parameters on EEPROM
02 Save parameters and activate Preset
04 Load and save default parameters
After having set a new value in some register, use the Save parameters on
EEPROM function in this Command register to store it. Set “01” in the
Command
register.
After having set a new value in some registers and a Preset value, use the
Save
parameters and activate Preset
function in this
Command
register to store
the values and activate the preset at the same time. Set “02” in the
Command
register.
WARNING
If you set a new singleturn or multiturn resolution and a new preset value at the
same time and then use this
Save parameters and activate Preset
function in
MAN AMx36 SSI_BiSS E 1.1.odt 6 - BiSS C-mode interface 25 of 36