AMx36 • SSI & BiSS C-mode
on user’s side. The best solution to minimize the interference must be carried
out by the user.
1.3 Mechanical safety
•
Install the device following strictly the information in the “3 - Mounting
instructions” section on page 11;
•
mechanical installation has to be carried out with stationary mechanical
parts;
•
do not disassemble the encoder;
•
do not tool the encoder or its shaft;
•
delicate electronic equipment: handle with care; do not subject the device
and the shaft to knocks or shocks;
•
respect the environmental characteristics declared by manufacturer;
•
unit with solid shaft: in order to guarantee the maximum reliability over time
of the mechanical parts, we recommend a flexible coupling to be installed to
connect the encoder and the installation shaft; make sure the misalignment
tolerances of the flexible coupling are respected;
•
unit with hollow shaft: the encoder can be mounted directly on a shaft
whose diameter has to respect the technical characteristics specified in the
purchase order and clamped by means of the collar and the fixing plate into
which an anti-rotation pin has to be inserted.
MAN AMx36 SSI_BiSS E 1.1.odt
1 - Safety summary
9 of 36
