5
Lightware L-1020 Projector User’s Guide
Connect the Mac adapter (available upon request*) to the laptop
external monitor output port. Connect the supplied VGA cable to the
output side of the Mac adapter shown in figure 5. Connect the other
end of the VGA cable to the L-1020
Monitor In connector. Set the dip
switches on the Mac adapter to match the output requirements of
your Mac. See page A-11 in the appendix for help in setting the dip
switches.
Different models of Mac Computers have different requirements for
using an external monitor. For more information on connecting to an
external monitor or projector see page A13 in the appendix.
Connecting to a Mac Laptop Computer
*To request a Mac adapter, call Lightware technical support at
1-800-445-9396.
Computer In
Figure 5: Mac Laptop Connection
