2
Lightware L-1020 Projector User’s Guide
Set the resolution of your computer display to XGA (1024x768) or
lower.
Disconnect the PC monitor cable from the computer monitor output
connection on your computer.
Connect the supplied 15 pin VGA signal cable to your projector
Computer In connector as shown in figure 2.
Connect the other end of the cable to the monitor output connection of
your computer.
Note: If you wish to view your computer and projected images
simultaneously, use the 15-pin HD gender changer to connect
the computer monitor cable to the projector
Monitor Out
connector.
Connecting to an IBM Compatible Desktop PC.
Getting Started
Figure 2: PC Desktop Connection
Monitor Loop Through
Connector
Computer In
