13
Lightware L-1020 Projector User’s Guide
Remote Functions
The following describes the various projector functions available from
the remote control. Those functions also available from the projector
keypad are noted.
On/Standby
Press the
On/Standby button, on the remote control or
the projector keypad, to cause the projector to change the
fan speed to high and turn the lamp on (
Live* state). If the
projector lamp has been on for more than 30 seconds,
pressing it again will slow the fan speed to standby and
turn off the lamp (
Standby* state). If the lamp has been
on for less than 30 seconds the projector will enter the
StandbyPending* state and the Power On/Standby button
on the projector keypad will flash pending transition to the
Live state.
*
For more information on the operational states of the projector
see
Operational States on page A-4 in the appendix.
Source
Press the
Source button on the remote control or the
projector keypad to toggle the input to the projector
through the available input sources i.e. computer, com-
posite video and S-video. If there are no other active
input sources connected an error message will appear for
5 seconds indicating the lack of an additional signal
source and the source selection will remain where it is.
Directional Select Keys
The
Directional Select Keys on the remote control or the
projector keypad provide the following functions:
l
Menu navigation and selection
l
Projected image positioning
l
Pan around a zoomed or cropped image.
l
Pointer movement
l
Slide control adjust
l
Curtain operation
