3
Lightware L-1020 Projector User’s Guide
Connecting to an IBM Compatible Laptop PC
Set the resolution of your laptop display to XGA (1024x768) or lower.
Connect the supplied 15 pin VGA signal cable to your projector
Computer In as shown in figure 3.
Connect the other end of the cable to the external monitor output
connector of your computer.
Activate the laptop’s external monitor (VGA) port. This is usually
accomplished using the Fn key in conjunction with one of the function
keys (Fn+F4 for example).
Note: See page A-15 in the appendix for a list of laptop manufacturers
and the methods they use to activate the laptop’s external
monitor port.
Figure 3: PC Laptop Connection
Computer In
