Lightning SA MultiCom, User Manual

Page: 32 / 172

Chapter 2 Introducing The MultiCom Firewalls
32 MultiCom Firewall User’s Manual
Introducing the MultiCom SpeedSurf
Back Panel
The back panel of your MultiCom SpeedSurf is where all of your cables will
connect to.
Config Push this button and let go when the front LEDs are:
ORANGE to load the last saved boot configuration
GREEN to load the configuration in memory position 1
RED to load the factory default configuration.
Power Use the Power interface to connect to the included MultiCom
power adapter.
Console Use the console port with the included cable to connect to the
serial port of your workstation. This allows you direct access
to the CLI (Command Line Interface) an can be used to
configure the firewall.
LAN Use the LAN (Local Area Network) interface to connect to
your network devices (workstations, printer servers, network
camera) or hub.
WAN Use the WAN (Wide Area Network) interface to connect to
your Broadband modem (xDSL, Cable or Wireless Modem).
Kensington
Lock Slot This connection is to physically secure your Ethernet firewall
with a Kensington Lock. It is the oblong hole on the right of
the back panel.