Lightning SA MultiCom User Manual Download

Page: 126 / 172

Appendix B Additional Licenses and Copyrights

126 MultiCom Firewall

User’s Manual

--------------

This product includes software developed by the University of California,
Berkeley and its contributors:

* Redistribution and use in source and binary forms, with or without

* modification, are permitted provided that the following conditions

* are met:

* 1. Redistributions of source code must retain the above copyright

* notice, this list of conditions and the following disclaimer.

* 2. Redistributions in binary form must reproduce the above copyright

* notice, this list of conditions and the following disclaimer in the

* documentation and/or other materials provided with the distribution.

* 3. All advertising materials mentioning features or use of this software

* must dInternet Providerlay the following acknowledgement:

* This product includes software developed by the University of

* California, Berkeley and its contributors.

* 4. Neither the name of the University nor the names of its contributors

* may be used to endorse or promote products derived from this software

* without specific prior written permission.

Summary of Contents for MultiCom













































































































































































Search results

Summary of Contents for MultiCom

Reviews:

Related manuals for MultiCom

Brands by name

Popular brands

Lightning SA MultiCom, User Manual

Search results

Summary of Contents for MultiCom

Reviews:

Related manuals for MultiCom

Brands by name

Popular brands