Lightning SA MultiCom, User Manual, Page: 47 / 172

MultiCom Firewall User’s Manual 47
Macintosh
These instructions use MacOS9. If you do not see a TCP/IP control panel or are
using an earlier version of the MacOS software please check the documentation
that came with your Macintosh Operating system for instructions on how to load
TCP/IP protocols into your computer.
To set your computer as a DHCP client
1. under
Configure
select “
Using DHCP
”
2. close the TCP/IP panel
3. choose “
Save
” when asked if you want to save your changes
To manually set your computer's IP address
1. under
Configure
select “
Manually
”
2. enter the IP address for your computer in the
IP address
field (10.0.0.2 for
example)
3. enter your network mask in the
Network mask
field (by default this should be
255.0.0.0)
4. enter your firewall IP address (the IP address of your MultiCom Firewall's
LAN interface, 10.0.0.1 by default) in the
firewall address
field
5. enter the DNS server IP addresses in the
Name server addr
field (by default
this is 10.0.0.1)
6. enter your local domain (if you have one) in the
Starting domain name
field
7. close the TCP/IP panel
8. choose “
Save
” when asked if you want to save your changes