Lighthouse Worldwide Solutions ApexR02, Operating Manual

Page: 25 / 84

Get Started
248083447-1 Rev 1 3-3
4. View the COM port assigned by using
Computer|Properties|Device
Manager
. It will show as a USB Serial COM Port with a COM
port number (see Figure 3-2).
Figure 3-2 Viewing COM Port Assigned
5. While the USB connector is inserted in the computer port
receptacle, its assignment will be displayed. If it is disconnected,
the assignment will disappear until it is reconnected. Using this
technique can quickly identify the correct port to use at the start of
the
LWS Instrument Setup program. This is handy if several ports
are shown during this step.
6. Exit the Install menu.
7. The SmartPort cable can be used on all
Apex Remote
sensors and
must be used to set the PoE
Apex Remote
’s IP address and all
Apex Remote
Alarm and Alarm Threshold settings.
8. Locate SmartPort on bottom of
Apex Remote
as shown in Figure
3-3 .
Figure 3-3 SmartPort Location
1- Right-click the Computer ICON and choose Properties
2- Choose Device Manager
3- Left-click Ports (COM/LPT)
These are examples only.
Example
COM Port
SmartPort