LSCT
Maintenance manual
Item N° 326617
Revision A
Date 25/06/2015
Page 9 of 93
UNDERRIDE GUARD AND ANTITIPPER WHEELS:
Dismantling:
1. Take off the back cover (See section
«Back cover»).
2. Take off the 4 nuts and washers then
remove the underride guard. (See figure
10)
Figure 10
3. Remove the nut cap and take off the nut
that is behind. (See figure 11)
4. Replace the antitipper wheel(s).
Figure 11
Assembly:
Assemble in the reverse order.
1. Re-tighten the nuts on the antitipper
wheels (adjust the tightening so that the
wheels can rotate freely). (See figure 12)
2. Replace the nut cap. (See figure 12)
Figure 12
3. Put back the underride guard with the 4
washers and the 4 nuts. (Tightening
torque: 27N.m). (See figure 13)
4. Put back the back cover (See section
«Back cover»).
Figure 13
REPAIRS:
