LSCT
Maintenance manual
Item N° 326617
Revision A
Date 25/06/2015
Page 65 of 93
KNEEREST ADJUSTMENT:
1. Remove the kneerest from the chair. (See
figure 155)
2. Adjust the width of the kneerest: unscrew
the two screws of the kneerest nut and
space them as desired; re-tighten the
screws (Tightening torque: 6.4N.m). (See
figure 156)
3. Adjust the width of the kneerest: unscrew
the two screws under the kneerest tube,
adjust the width as desired, re-tighten the
screws ((Tightening torque: 27N.m)
(Careful: position the screws in front of
the notches)). (See figure 157)
4. Adjust the height of the kneerest: unscrew
the two screws of both sides of the
kneerest, adjust the desired height, re-
tighten the screws (Tightening torque:
11.1N.m). (See figure 158 & 159)
SETTINGS:
Figure 155
Figure 156
Figure 157
Figure 158
Figure 159
