background image

MAINTENANCE

 AND

 CARE

Maintenance and Care 

The unique ultra filtration membranes 
used in the LIFESAVER bottle have been 
developed to deliver a high volume 
throughput at very low pressures. The 
capacity of your LIFESAVER cartridge will 
depend on the water quality. 

LIFESAVER bottle is designed to filter 
water only. It is not designed for filtering 
sugared or carbonated drinks, alcohol or 
any other liquids.

LIFESAVER bottle will not filter out salts.

If you suspect the cartridge has been 
damaged in some way always replace 
the cartridge immediately and wash the 
bottle thoroughly in a mild disinfectant.  
In any event perform a Membrane 
Integrity Check (page 15)

LIFESAVER bottle has a long shelf life. 
It can be stored unused for up to  
3 years. Once the bottle has been  
used, the cartridge will last up to a  
further 2 years dependent upon usage  
conditions. Please check the end of  
shelf life date on your product. 

front-side washing lifesaver 
bottle

Over the life of the membranes 
particulate matter will build up on its 
surface. The filter cartridge’s unique 
design induces particulate matter to form 
a caking layer on its external surfaces.  
To reduce this build-up you should 
perform a front-side wash on a regular 
basis. 

8

iMPOrTaNT!

DO NOT subject the LIFESAVER bottle/ 
cartridge to shock or other misuse such 
as inserting objects into the cartridge.
DO NOT fill the cartridge up with any 
liquids other than water as this may 
cause irreparable damage and in any 
event will void your warranty.
DO NOT allow large, sharp or abrasive 
matter such as stones, glass, metal and 
other detritus to enter the cartridge. The 
pre-filter should always be used.
DO NOT use detergents or other 
cleaning agents to clean your 
LIFESAVER bottle / cartridge except 
where specified.

Summary of Contents for 4000UF





















Reviews: