UK
frequently asked questions
Q. i am finding it difficult to
unscrew the base
A. If you find it difficult to remove the
base, this could be due to an over
pressurisation. To solve this, leave
the teat in the open position for a
while and try again. Alternatively
you may have over tightened
the base. This will require either
access to hot water which will
help loosen the base or good old
fashioned elbow grease.
you may also try pumping the
bottle 8-10 times and try again.
Sometimes this will loosen the
base.
Q. Where do i purchase
additional cartridges?
A. Replacement cartridges and other
LIFESAVER bottle consumables
are available from the dealer
where you purchased your
LIFESAVER bottle.
Alternatively go to our website
www.lifesaversystems.com and
buy online.
Q. Where do i dispose of spent
cartridges?
A. The cartridge is made of
recyclable plastic and should
be disposed of at a recycling
centre. If this is not possible, you
can dispose of it in your normal
household waste.
Q i am pumping but no water
is coming out
A. your cartridge may have expired
or may require a front-side wash
(page 8).
Q The pumping action has
become stiff
A. The most likely reason for this
is a lack of silicone in the pump
(maintaining the pump -
page 14).
Q Where can i get
replacement parts?
A. LIFESAVER bottle has been
engineered so that all parts are
replaceable. Please go to the
dealer where you purchased
your LIFESAVER bottle.
Alternatively go to our website
www.lifesaversystems.com and
buy online.
For a list of these and other
frequently asked questions
please visit our website
www.lifesaversystems.com.
FRE
q
UENTL
y
ASKED
q
UESTIONS
17
