MAINTENANCE
AND
CARE
iMPOrTaNT!
Changing your LIFESAVER cartridge
in the field causes a heightened risk of
cross contamination during cartridge
change over. Should you need to
replace your cartridge, ensure you have
clean, dry hands. Once the expired
cartridge is removed, clean, disinfect
and dry the bottle before inserting the
new cartridge. This will reduce the risk
of cross contamination.
How to install or change a
lifesaver bottle Uf cartridge
Before changing your cartridge, try front-
side washing first to remove particulate
matter (page 8). This may just extend
the life of your cartridge long enough to
meet your requirements.
As the LIFESAVER cartridge has been
designed for exceptional service life, it
is rare that you will need to change the
cartridge whilst in the field. However,
should it be necessary, it is very
important that you follow the instructions
carefully:
•
Empty the bottle of water. Empty the
teat end of water.
•
Unscrew & remove the base
1
•
Place your hand over the base to
support the cartridge*.
2
•
Keeping the bottle in the vertical
position unscrew the cap. The
cartridge will drop into your hand.
3
•
Thoroughly clean the LIFESAVER
bottle by washing it with mild washing
up liquid in warm water. Use a soft
cloth for this. Ensure that all dirt is
removed and the bottle is thoroughly
clean. Rinse thoroughly and allow
to dry.
•
Remove the new LIFESAVER
cartridge from it’s packaging.
10
1
2
