15
Step 6
Slide one Pec Foam Roller (23) onto the Right Pec Arm (8).
Attach the U Handle (9) onto the Right Pec Arm (8) with two Ø10 Curve Washers (49), and
two M10x25 Hex Bolts (60). Tighten bolts with the Wrench provided.
Attach the Right Pec Arm (8) onto the clevis of the Support Frame for Pec Arm (6) with one
M12 Nylon Lock Nut (57), one M12x85 Hex Bolt (67), and two Ø12 Flat Washers (53).
Tighten bolt and nut with two Wrenches provided. Install two M12 Nut Caps (78) onto the
M12 Nylon Lock Nut (57) and M12x85 Hex Bolt (67). Use the same procedure to install the
Left Pec Arm (7) onto the other clevis of the Support Frame for Pec Arm (6).
Plastic Part: Foam Roller:
Hardware:
4 Nut Caps (M12)
2 Pec Foam Rollers
2 Nylon Lock Nuts M12
2 Hex Bolts (M12x85)
4 Flat Washers (Ø12)
4 Curve Washers (Ø10)
4 Hex Bolts (M10x25)
2 Wrenches 19-24
1 Wrench (19-17)
Tool:
6
53
67
78
57
53
78
9
23
49
60
8
Summary of Contents for 63130
Page 4: ...3 PARTS NUMBERS AND ILLUSTRATIONS ...
Page 22: ...21 CABLE LOOP DIAGRAM ...