13
Step 4
Insert each Weight Stack Sliding Rod (5) into the corresponding hole in the Top Tube (4).
Secure Weight Stack Sliding Rod (5) in the Top Tube (4) using two Ø10 Flat Washers (52)
and M10x25 Hex Bolts (60). Tighten bolts with the Wrench provided.
Attach the Top Tube (4) onto the Main Support Tube (3) with two M10 Nylon Lock Nuts (56),
and two Ø10 Flat Washers (52). Tighten nuts with two Wrenches provided.
Attach the Pec Hook (20) onto the Main Support Tube (3) with one M8 Nylon Lock Nut (55),
one M8x50 Hex Bolt (65), and two Ø8 Flat Washers (51). Tighten bolts and nuts with two
Wrenches provided.
Hardware:
2 Hex Bolts (M10x25)
4 Flat Washers (Ø10)
2 Nylon Lock Nuts (M10)
1 Nylon Lock Nut M8
1 Hex Bolt (M8x50)
2 Flat Washers (Ø8)
2 Wrenches (14-10)
1 Wrench (19-17)
Tool:
60
52
4
52
56
3
5
20
65
51
51
55
Summary of Contents for 63130
Page 4: ...3 PARTS NUMBERS AND ILLUSTRATIONS ...
Page 22: ...21 CABLE LOOP DIAGRAM ...
